Smart IoT Gateway - iConnector Battery operated

SKU: STHC-B

STHC-B is same as STHC, is a Smart IoT Gateway, aka iConnector, a main component in any IoT application. However, STHC-B is operated by a Primary battery 3.6V, suitable for applications where no grid power like Water pipeline, water network...In addition, STHC-B is also powered by external power supply 7..48VDC or Solar panel system. STHC-B has built-in 1 Pulse input to read the Pulse from flow meter...and 01 Digital input can connect to Pressure sensor, Level, Temperature, Humidity... Data will be sent back to server for data logging, data analytics, monitoring & controls...With Ultra low power design, it can uses 01 battery size D for up to 05 years (depend on configuration of data logging and sending).

3-in-1 Device

  • iConnector is a 3-in1 device, comprises Data logger + Logic Controller + Internet Gateway

5-Year Battery Operated

  • Easy to configure the time intervals of Data logging, Data sending and with Event processor allows the battery life up to 5 years!

Built-in Sensors

  • 1 x Pulse input as standard and 1 x Digital input to connect Pressure sensor, Differential sensor, Level Sensor, Temperature, Humidity…

NO need Programming

  • Don't need to learn any Programming language, just configure it remotely by Globiots platform

Just 2-step for using

  • Just install and configure it remotely on Globiots, then you can start use it!

Since 2014!

  • Industrial customers have been using iConnectors since 2014 because of its quality!
Host CommunicationGPRS Quadband/3G-Dual band/NB-IoT, internal antenna
Host communication supportsTCP/IP, UDP/IP, FTP, HTTPS, SNMP...
Vietnam Type Approval CerificationQCVN 54:2011/BTTTT, QCVN 15:2015/BTTTT (DAVITEQ B00122019)
Pulse Input1 x Pulse input with counting function, dry-contact, max 1Hz, auto-reset counter when reaching 9 digits
Digital Sensor Input1 x Digital sensor input for DULP sensor type (Digital Ultra Low Power ), M12 connector, IP67
Battery Supply1 x D size battery holder, 3.6VDC
External Power Supply7..48VDC, avg 200mA, peak 1.5A
Back-up batteryLithium Super Capacitor (to alert shortage of power supply)
On-board logging2MB Flash
SIM slot01 x micro-SIM
Operating Temperature-20 .. + 85 degC (refer temperature working range of Battery being used)
DimensionH110xW110xD70
HousingPoly-carbonate housing, IP67, wall mount pads
Net weight< 250 g (excluded Battery and Sensor)
ITEM CODESDESCRIPTIONS
STHC-B-ISG01-01iConnector GPRS Quadband, internal antenna, 1 x battery size D 3.6V, 1 x pulse input, 1 x digital sensor input DULP type, IP67
STHC-B-ISG02DB-01iConnector 3G Dualband, internal antenna, 1 x battery size D 3.6V, 1 x pulse input, 1 x digital sensor input DULP type, IP67
STHC-B-ISGNB1-01iConnector LTE Cat NB1 multi-band, internal antenna, 1 x battery size D 3.6V, 1 x pulse input, 1 x digital sensor input DULP type, IP67
SIMMOBI-3GMobifone Data SIM CARD, only SMS receiving mode (Vietnam only)
SIMMOBI-10K-01Y12-month data plan for SIM CARD, unlimited data, GPRS/EDGE/UMTS/HSPA (Vietnam only)
**ACCESSORIES**
PPS-G-10Gage Pressure Sensor DULP Module, range 0-10 barg, accuracy 0.5%, process connection G1/4-male, 304SS, electrical connector M12-male
ATE-11Compact ambient Temperature Sensor DULP module, M12-male connector
ATE-12-300300mm Cable type ambient Temperature Sensor DULP module, M12-male connector
ATH-11Compact ambient Humidity & Temperature Sensor DULP module, M12-male connector
ATH-12-300300mm Cable type ambient Humidity & Temperature Sensor DULP module, M12-male connector
RS485-FM12-USB-1RS485/USB multi-purpose Configuration cable with connector m12 male, female and flying leads, with Power adapter 12VDC/2.0A
SLK-LIFE20WSolar panel kit, included high quality Lithium battery and charger, IP65, mounting bracket for 2-inch pipe
Notes* Select above DULP sensor modules to suit your application
**Purchase configuration cable RS485-FM12-USB-1 for off-line configuration of iConnector

Related products

Loading...