Fuel level sensor for Industrial Applications

SKU: CAP10CN

CAP10CN is industrial version of PulseCAP10, designed for industrial applications like generator, stationary fule tank in factory, building, construction site...CAP10CN has 4-20mA output or RS485/ModbusRTU output, can be connected easily to any industrial devices like PLC, IoT Gateway, iConnector... CAP10CN has very high accuracy 0.1% of span, can be used for tank up to 30.000 liters volume.

99.9% Accuracy

  • Patented digital capacitance measuring technique PulseCAP10 of Daviteq allow high accuracy

Easy calibration

  • Easy calibration for any fluid by just a button

Industrial Output Signals

  • Output 4-20mA or RS485/modbusRTU for easy connecting to PLC, controller, SCADA, BMS…

Shorten to 100mm only!

  • Allow to cut as short as 100mm length

Extend up to 4000mm

  • Easy extend to 4000 mm by adding extension probes
Sensor lengthstandard 1500mm, extend to 4000mm (by extension probe) or cut down to 100mm
Output4-20mA output (with 250 ohms precision resistor), or RS485/ModbusRTU
Power supply8..50VDC
Consumptionmax 35mA
Working pressure-1 .. 2 barg
Working temperature-40 oC .. + 85 oC
Accuracy+/- 0.1% of span (at 25 oC)
Temperature drift< + 0.03% of span per 10oC
Resolution1/1000 of span
Sensor materialsAlloy & Engineering plastic
Electrical connectionconnector M12 (matched connector and cable must be ordered seperately)
HousingCast alumium, IP67 protection
Process connectionPlastic flange
Standard accessoriesflange, o-ring, gasket, protection covers, self-tapping screws, twisted seal, fuse & fuse holder
CertificationCE-Marking per EN61236-1 (with test report)
ITEM CODEDESCRIPTIONS
CAP10CNC1500FFuel Level Sensor PulseCAP10CN, M12-Female connector, calibration by button and led, extension up to 4000mmm, factory calibrated by standard Diesel, L = 1500mm, output 4-20mA, with accessories, no cables, for industrial applications
CAP10CNR1500FFuel Level Sensor PulseCAP10CN, M12-Male connector, calibration by Modbus tool on PC, extension up to 4000mmm, factory calibrated by standard Diesel, L = 1500mm, output RS485/ModbusRTU, with accessories, no cables, for industrial applications
CAP10EXT0500Extension Probe for CAP10, L=500mm
CAP10EXT1000Extension Probe for CAP10, L=1000mm
CAP10EXT1500Extension Probe for CAP10, L=1500mm
**ACCESSORIES**
2M-MM12CAB4x0.25M12 4pin Male assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4x0.25mm2, L=2m, Rohs, Shield 80%
2M-FM12CAB4x0.25M12 4pin Female assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4x0.25mm2, L=2m, Rohs, Shield 80%
5M-MM12CAB4x0.25M12 4pin Male assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4x0.25mm2, L=5m, Rohs, Shield 80%
5M-FM12CAB4x0.25M12 4pin Female assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4x0.25mm2, L=5m, Rohs, Shield 80%
10M-MM12CAB4x0.25M12 4pin Male assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4x0.25mm2, L=10m, Rohs, Shield 80%
10M-FM12CAB4x0.25M12 4pin Female assembly connector with Soldering terminals and coding A and Control Cable Cu/PVC/OS/PVC 4x0.25mm2, L=10m, Rohs, Shield 80%
RS485-FM12-USB-1RS485/USB multi-purpose Configuration cable with connector m12 male, female and flying leads, with Power adapter 12VDC/2.0A
CAP10PROTECTSETCAP10 protection cover set
CAP10PARTSKITCAP10 parts kit
CAP10INSUFLANGECAP10 plastic flange
CAP10HOUSCOVERCAP10 housing protection cover
CAP10CNTCOVERCAP10 connector protection cover
CAP10FOOTER-001CAP10 filtered footer
CM-CAP10LOWERGASKET2CAP10 rubber gasket
CAP10BLINDCAPCAP10 blind cap

Related products

Loading...