Wireless Process Temperature Sensor

SKU: WS433-M12F-PTE

Wireless Process Temperature Sensor is a combination of wireless sensor transmitter WS433-M12F and Process Temperature Sensor PTE, utilizes digital temperature sensor delivers high accuracy measurement in range -20 to + 85oC. Easy connect to WS433-M12(-T) via M12 connector. Optional 1m extension cable can be used for some special case. This sensor is mainly used to measure temperature of chiller water, food liquid, chemical of any liquid, compressed air, nitrogen, oxygen, ammonia gas...With Sub-GHz technology from Texas Instruments allows long range transmission at ultra-low power consumption. It is configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software. The wireless sensor can last up to 10 years with a single AA battery.

For Gas or Liquid

  • For measuring temperature of chiller water, food liquid, chemical of any liquid, compressed air, nitrogen, oxygen, ammonia gas...

Plug & Play

  • Just plug the pressure module onto WS433-M12F via M12 connector, then it works automatically

High accuracy

  • Digital sensor with factory-calibration

High Pressure

  • Can withstand up to 20 bar-g process pressure

IP67 Weather-proof

  • IP67 connector for indoor and outdoor uses

Remote Installation

  • Via 1m extension cable
SENSOR SPECIFICATION :
Sensor Digital type, factory calibrated, IP67, immersible to ice-water for quick validation
Measuring range-20 .. + 85 oC
Accuracy & Resolution+/- 0.5oC, 0.125oC
Probe length & Material50, 100 & 200mm, 304SS
Process Pressure-1 to 20 barg
Process Connection1/2-14 NPT
Electrical connectionM12-male connector
WIRELESS TRANSMITTER SPECIFICATION :
Data speedUp to 50kbps
Tranmission distance, LOS1000m
AntennaInternal Antenna
Battery01 x AA 1.5-3.6VDC, up to 10-year operation, depends on configuration
Frequency BandISM 433Mhz, Sub-GHz technology from Texas Instrument, USA
International ComplianceETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan)
Vietnam Type Approval CertificationQCVN 73:2013/BTTTT, QCVN 96:2015/BTTTT (DAVITEQ B00122019)
Security StandardAES-128
Operating temperature of PCB-40oC..+60oC (with AA L91 Energizer)
HousingPoly-carbonate, IP67
Installation methodL-type bracket SUS304 , by M4 screws or double-sided 3M tape (included)
Product dimensions & weight125x30x30mm, < 60g (without battery)
Box dimension & gross weight190x50x50mm, < 100g
ITEM CODEDESCRIPTIONS
PTE-11-050Process Temperature Sensor, -20..+85 oC range, DULP communication, 50mm Probe length, 304SS wetted material, 1/2"-14 NPT Male process connector, PN20, M12-male connector, IP67
PTE-11-100Process Temperature Sensor, -20..+85 oC range, DULP communication, 100mm Probe length, 304SS wetted material, 1/2"-14 NPT Male process connector, PN20, M12-male connector, IP67
PTE-11-200Process Temperature Sensor, -20..+85 oC range, DULP communication, 200mm Probe length, 304SS wetted material, 1/2"-14 NPT Male process connector, PN20, M12-male connector, IP67
SECB-11-1000DULP sensor extension cable 1000mm, M12-F and M12-M connectors, Shielded cable, 4-cores, IP67
WS433-M12FWireless Sensor Transmitter 433Mhz, compatible with all DULP sensor modules, AA 1.5VDC battery, IP67
Notes*Please select sensor probe then select the wireless transmitter module WS433
**Select extension cable when needed

Related products

Loading...